1. CYLINDER CONTROL UNIT:   Integral design requires no separate release pressure cylinder - separate wire cable activation lines for automatic fusible link and optional remote pull station provide an added measure of safety - an easily accessible manual release mechanism which provides an option to the automatic fusible link and, depending on local codes, can be used in place of a remote manual pull station - unique fool proof technique for achieving necesssary input wire cable tension.
2. PIPING:   Unbalanced piping network simplifies application design and installation - no separate piping to connect system pressure cylinders to extinguishing agent container. Schedule 40 stainless, chrome-plated and black pipe can be used.
3. CYLINDERS:   (DOT-4BW-225 Rated) - Contain PyroChem Potassium Carbonate Solution stored at 225 psi - pressure gauge for visual maintenance checks - 3.00 and 4.60 gallon sizes provide 10 and 15 flow point coverage respectively, offering a broad range of application coverage, as well as 6.0 gallon tanks available when applicable.
4. NOZZLES:   Fixed and Swivel Head Nozzles have been established to relax placement tolerances.
5. REMOTE MANUAL PULL STATION:   Simple operating instructions with a double action release avoids careless system discharge - a 150' wire cable run with 1/16th inch cable and 40 corner pulleys maximum - a dedicated wire cable input line to the cylinder head provides a true back-up in the event fusible links are fouled.
6. FUSIBLE LINK KITS:   Accommodates both series and terminal placement to minimize inventory and simplify ordering - all necessary components included for efficient assembly and installation - a 350 degree Fahreinheit fusible link standard - other temperatures available - 20 fusible links on a 150' wire cable run with 40 corner pulleys maximum provides substantial hazard coverage.
7. AUTOMATIC GAS SHUT-OFF VALVE:   Complies with requirements pertaining to the shut-off of fuel as described by NFPA 17A - after regular maintenance/service check can be reset at control head for convenience of service technician - a 100' wire cable run with 30 corner pulleys maximum provides mounting flexibility.
8. CORNER PULLEYS AND ACCESSORIES:  Designed to ensure reliable system function, as tested by Underwriters Laboratories.
   

 UL and ULC Approved
 Complies with NFPA Standard 17A and 96
 Meets the requirements of the Building Officials and Code Administrators
 Approved by the City of New York Material and Equipment Acceptance Division